„NUMBER ONE“ IN CONTACTLESS ULTRASOUND HANDLING

„NUMBER ONE“ IN CONTACTLESS ULTRASOUND HANDLING

„NUMBER ONE“ IN CONTACTLESS ULTRASOUND HANDLING

Handhabungssystem mit Ultraschalllager zs-handling regensburg

Our handling systems use the ultrasonic suspension technology to apply the handling forces to the workpiece and can be used in all atmospheric processes.

Vibration generators with separate power electronics generate a compressed air film with repulsive forces. Process combinations enable the generation of attracting forces.

Innovative Technology:

Ultrasonic Suspension Technology

sonotrode quadratisch ultraschalllager zs-handling
sonotrode kreis ultraschalllager zs-handling
sonotrode bogen ultraschalllager zs-handling
sonotrode lang ultraschalllager zs-handling

The surrounding air or process gas is compressed by the ultrasound. This allows components to be lifted and guided along defined paths without contact. In combination with negative pressure, workpieces can also be gripped on the upper side - without touching them.

The ultrasonic suspension technology requires less energy than other non-contact handling technologies.

The Advantages of Our Technology
  • Smooth gripper surfaces without nozzle openings, therefore very easy to clean and maintain.
  • Reduced cleaning intervals, thus less downtime, higher productivity and lower costs.
  • Applicable upto cleanroom class ISO 1.
  • Savings in cleaning equipment, thus lower operating costs.
  • No compressed air generation with complex and cost-intensive air conditioning required.
  • Ultrasonic system practically maintenance-free, readout and correction of operating parameters possible during operation.
  • Can be operated with any ambient gas, e.g. inert gas.
  • Double-sided inspection is possible.
  • No carry-over of impurities, thus significantly reduced risk of contamination.
  • No introduction of mechanical stresses into workpieces, thus reducing the risk of workpiece damage.
  • High flatness, also on formlabile substrates (up to 5µm).
  • Comparatively low life cycle costs (Total-Costs-of-Ownership [TCO]).
  • Application-dependent throughputs up to three times higher.
  • Reduced footprint and thus space consumption in the production environment.
  • Handling on processed or coated surfaces is also possible from the tospside.
ZS-Handling contactless conveying ultrasonic handling systems

ZS-Handling GmbH • Budapester Straße 2 • 93055 Regensburg • T: +49 941 60389 900 • F: +49 941 60389 999